• Thixotropic liquid membrane without sagging on vertical surfaces.
• Great elasticity of the membrane allowing it to absorb contractions and expansions.
• Provides continuous elastic membranes without joints or welds.
• Completely Waterproof. Resistant to standing water.
• Prevents cracks.
• Water-based product for easy application and repair.
• Colorable with water-based pigment pastes.
• High resistance to chemical agents, meteorological changes, environments
aggressive and temperatures without altering its properties.
• Permeable to water vapor. The membrane that forms once the product is dry
breathes, preventing the accumulation of water under the membrane.
• Excellent resistance to the environment and sun exposure (U.V.). The color white
It acts as a solar reflector, reducing the interior temperature of the building considerably.

Apply with a brush, roller or airless spray in 2 coats.
Before applying, shake the product well and check that the support is clean, dry, without residual moisture and as solid as possible. In case of loose material or in poor condition, use appropriate mortars for repair.
Add component A to component B and mix gently with a low speed electric stirrer (300 rpm).
It can be diluted with 5-10% water to adjust viscosity. For the finishing coat, apply directly as it comes in the container, without dilution.
Concrete support requirements:
Hardness: R28, 15 MPa.
Ambient humidity < 10%.
Application temperature 5 to 35 ºC.
Relative humidity: < 85%.
To eliminate cracks and imperfections, use the FUTUR POLYESTER ARMOR primer once applied. Fix the reinforcement with the primer and apply the necessary layers of undiluted product until the performance is complete.
Brush or roller application:
First layer performance: 1.5 Kg/m2 with FUTUR POLYESTER ARMOR.
Second layer performance: 1.1-1.2 Kg/m2 with FUTUR POLYESTER ARMOR.
When applied with an Airless spray, the minimum yield per layer will be 1 Kg/m2.
Total consumption: 2.7 Kg/m2.
To clean utensils, use water once the application work is finished.
Store in its original container away from frost, direct sun and extreme temperatures. Do not apply at ambient temperatures below 5 ºC or above 35 ºC. Do not apply when there is a risk of rain or wet weather. Apply in places with good air renewal.
In case of insufficient ventilation, use an appropriate protective mask.

Waterproofing, protection of horizontal and vertical surfaces of concrete, fiber cement, cement tiles, wood, rusty metal, galvanized steel, etc.
Allows the protection and waterproofing of polyurethane foam, terrace coverings, applications under flooring in humid areas, etc.
Very useful in all types of construction and masonry companies, applicators, painters, maintenance personnel of large communities, repairs of hotels, residences, social centers, shopping and sports centers, etc.