• Fast curing.
• Ultra-fast gel formation time (7-12 seconds).
• Membrane without bubbles or defects.
• 100% solids.
• Without plasticizers.
• Catalyst without toxic heavy metals.
• Curing and formation of the membrane is not affected by humidity or other weather conditions.
• Excellent resistance to extreme temperatures (-40ºC to +80ºC). Breaking temperature of 350ºC.
• Excellent mechanical properties, high resistance to tension, breakage and abrasion.
• Good resistance to chemical agents.
• Permeable to water vapor. Allows perspiration without moisture accumulation under the membrane.
• Availability of primers for almost any type of media.

Before applying the product, check that the support is clean and free of traces of oil, grease, silicone, contaminating waxes or soil materials. If repair is needed, apply appropriate mortars. The support must be dry, without residual moisture. We recommend using a primer appropriate to the characteristics of the support.
The product is for hot application: The containers of the two components must be heated to a temperature of about 25ºC before mixing.
Mix the two containers (1/1 by volume) using a low-speed electric stirrer.
Application with a Graco GH833 two-component gun, which maintains the product at 80ºC, also in a hose and with a power of 230 psi (± 200 bar) using an active carbon mask and taking into account the pot life of the product. For cleaning, always use FUTURSOLVENT 01.

Yield is 1.5 to 2 Kg/m2.
Pot life: 7-12 seconds. Once the application is done, the product is passable after 1 minute.
In case of dilution, apply FUTURSOLVENT 01 in a maximum proportion of 10%. Singular points, supports with a lot of movement, active cracks, etc. must be reinforced. We recommend reinforcement with armor (FUTUR ARMOR POLYESTER 50 GR) or putties (FUTURMASTIC PU).

imitations:
Do not apply to unstable supports.
In closed areas, ensure proper ventilation during application and 24 hours afterward. Avoid the formation of puddles of the product.
Incorrect treatment of cracks and singular points can lead to a reduction in the useful life of the waterproofing. When exposed to the sun, protect with aliphatic varnish, avoiding yellowing, change in tone or chalking.
Stable stored in a dry place at a temperature of 5-25ºC for 12 months in unopened original packaging.

• Very useful in all types of construction companies, public works and repair contracts for applications with hot polyurea.
Supported media:
Waterproofing and protection of covered parking lots with heavy traffic, train and bus stations, stadium stands, shopping centers, etc.
• Retention tanks, water tanks and irrigation canals, etc.
• Covers with heavy protection (bridge platforms and concrete plates, etc.).
• Passable roofs (Terraces, balconies, etc.).
• Garden roofs. Buried and perimeter walls.
• Polyurethane or Polystyrene foam protection.
• Sealing cementitious surfaces.