FUTURCOAT POLIUREA
HOT APPLICATION POLYUREA FOR WATERPROOFING AND PROTECTION
Pure hot-applied polyurea with a solids content of 100% solids for application with a two-component gun. 1:1 volume product with excellent flexibility and a specially formulated cure for excellent adhesion.Product recommended for industrial and commercial applications that require high resistance to abrasion and impact.
• Fast curing.
• Ultra-fast gel formation time (20-30 seconds).
• Membrane without bubbles or defects.
• 100% solids.
• Without plasticizers.
• Catalyst without toxic heavy metals.
• Curing and formation of the membrane is not affected by humidity or other weather conditions.
• Excellent resistance to extreme temperatures (-40ºC to +80ºC). Breaking temperature of 350ºC.
• Excellent mechanical properties, high resistance to tension, breakage and abrasion.
• Good resistance to chemical agents.
• Permeable to water vapor. Allows perspiration without moisture accumulation under the membrane.
• Availability of primers for almost any type of media.
Before applying the product, check that the support is clean and free of traces of oil, grease, silicone, contaminating waxes or soil materials. If repair is needed, apply appropriate mortars. The support must be dry, without residual moisture. We recommend using a primer appropriate to the characteristics of the support.
The product is for hot application: The containers of the two components must be heated to a temperature of about 25ºC before mixing.
Mix the two containers (1/1 by volume) using a low-speed electric stirrer.
Application with a Graco GH833 two-component gun, which maintains the product at 80ºC, also in a hose and with a power of 230 psi (± 200 bar) using an active carbon mask and taking into account the pot life of the product. For cleaning, always use FUTURSOLVENT 01.
Yield is 1.5 to 2 Kg/m2.
Pot life: 5-12 seconds. Once the application is done, the product is walkable after 5 minutes.
In case of dilution, apply FUTURSOLVENT 01 in a maximum proportion of 10%. Singular points, supports with a lot of movement, active cracks, etc. must be reinforced. We recommend reinforcement with armor (FUTUR ARMOR POLYESTER 50 GR) or putties (FUTURMASTIC PU).
Limitations:
U.V. resistance can be increased. avoiding yellowing, change in tone or chalking by applying a layer of PROTEC PU (Pigmented) or FUTURPOL T (pigmented). Stable stored in a dry place at a temperature of 5-25ºC for 12 months in unopened original packaging.
• Very useful in all types of construction companies, quick repair contracts, general masonry, community maintenance, building repair and restoration, etc.
Of application in:
• Waterproofing and protection of non-accessible roofs, limited to maintenance (Terraces, balconies and metal, aluminum or fiber-cement roofs, etc.).
• Covers with heavy protection (bridge platforms and concrete, etc.).
• Passable roofs (Terraces, balconies, etc.).
• Covered for heavy traffic (parking lots, stations, stadium stands, shopping centers, etc.).
• Retention tanks (water tanks and irrigation canals, etc.).
• Green roofs (with anti-root resistance).
• Buried and perimeter walls.
• Polyurethane or Polystyrene foam protection.
• Sealing cementitious surfaces, etc.
Color B: Colorless or Pigmented
Containers: 225Kg
Ask for more information