• Excellent bridging of fissures and cracks.
• Excellent resistance at high temperatures, supports hot and cold asphalt with heavy machinery.
• Low solvent content, non-flammable, non-IMO for transport.
• Excellent chemical resistance
• Thixotropic, can be applied to complex structures (horizontal and vertical).
• Excellent mechanical properties, high elasticity and resistance to breakage.
• Highly hydrophobic.

Before applying the product, check that the support is clean and free of traces of oil, grease, silicone, contaminating waxes or soil materials. If repair is needed, apply appropriate mortars.
Support and environmental conditions:
Porous concrete support, without grout and free of curing liquids.
Support hardness: R28 (15 MPa).
Humidity: W < 10%.
Support temperature: 5-35ºC.
Relative humidity: <85%.
Compressive strength: 15 N/mm2.
Tensile strength of concrete: 1 N/mm2.
If in doubt, perform a compatibility test before application.
It is applied with a brush, roller or airless spray gun (Type Graco GH833). For your cleanliness always
use a suitable solvent (FUTURSOLVEN 01).
Stir with the help of a low-speed electric stirrer (300-400 rpm) to avoid the inclusion of air in the mixture. Do not shake excessively to avoid the appearance of occluded air bubbles.

Touch dry: 6-24 hours (25ºC, 55 HR). Do not repaint after 48 hours.
Performance: 2-3 Kg/m2 for waterproofing and 0.6-0.8 Kg/m2 for maintenance.
In applications with an airless gun, add 10% FUTURSOLVEN 01 to the product to adjust the spray viscosity.
For slabs that are going to have asphalt as a surface, it will be necessary to apply an additional layer of product with a yield of 0.4-0.5 Kg/m2 with fresh dusting to saturation of aggregate with a particle size of 0.4-0.8.
Repainting: 6-24 hours.
We recommend not allowing more than 48 hours to pass between coats.
Finish: Dark gray.

The times are approximate and are affected by changes in environmental conditions and especially by changes in humidity and temperature.

Stable for 12 months from its manufacturing date, in its original, well-closed and undamaged container. Store in a dry and cool place at temperatures between +5ºC and +25ºC.
Apply in places with adequate ventilation to eliminate excess solvent during curing, at least within 24 hours of application.
To clean tools, use FUTURSOLVENT 01.
Once the material has hardened, it can only be removed by mechanical means.
Maintenance and cleaning of treated surfaces: To maintain the appearance of the floor after application, all spills must be removed immediately after they have occurred. Regularly clean floors using rotating brushes, high-pressure cleaners, vacuum cleaners, using appropriate detergents and waxes.

• Very useful in all types of construction companies, public works and bridge deck repair contracts.
Supported media:
• Concrete, cement mortar.