• Protects the exterior walls where it is applied from the action of humidity and atmospheric agents.
• Once the product is dry, it provides a transparent, aliphatic membrane that does not yellow over time.
• High resistance to weathering, environmental humidity and UV rays without altering its properties.
• Contains additive that protects the applied and dried product film from the action of humidity and atmospheric agents, providing highly durable surfaces.
• Excellent adhesion on almost all types of surfaces.
• Completely Waterproof.
• Excellent elasticity, abrasion, tension and mechanical properties.
• Excellent stability to light and UV rays.
• High resistance to weather changes, aggressive environments and temperatures without altering its properties.
• The membrane allows the treated support to "breathe".
• Contains a film protector that prevents paint deterioration when the support is wet.
• Forms continuous sheets without joints or welds.
• Resistance to temperature changes.
• In the rehabilitation of buildings, it avoids demolitions and overweight,
• The membrane is completely waterproof and resists permanent contact with water, hydrolysis and chemical agents.

Before applying, shake the product well and check that the support is clean, dry, without residual moisture and as solid as possible. In case of loose material or in poor condition, use appropriate mortars for repair. If the support has some residual moisture, whitish stains may appear or the waterproofing layer may loosen.
Apply with a brush, roller, airless spray gun, spray or dip in thin layers without allowing more than 48 hours to pass between coats.
As a primer, use FUTURPRIMER-T PU before applying the product as an adhesion promoter.
Yield between 250-500 g/m2. Touch dry: 30-60 minutes. Total curing: 5-7 days.
To clean utensils, use FUTURSOLVENT-001 once the application work is finished.
Store in its original container away from frost, direct sun and extreme temperatures. Do not apply at ambient temperatures below 5 ºC or above 25 ºC. Do not apply at risk of rain. Apply in places with good air renewal. In case of insufficient ventilation, use an appropriate protective mask.

Very useful in all types of construction and masonry companies, applicators, painters, maintenance personnel of large communities, repairs of hotels, residences, social centers, shopping and sports centers, etc.
It is used in the waterproofing of natural stone, wet effect, reinforcement in floors,
Dust sealing on sports courts, protector of floors and mass-pigmented concrete, to prevent color loss and degradation. Roof waterproofing
Face brick waterproofing, monolayer, cotegran, etc.

Supported media:
Tiles, natural stones, artificial stone, wood, concrete, facing brick, concrete floors, industrial warehouse floors, fiber cement, tile protector. Printed concrete. Waterproofing of Facades, Monolayers, Renderings, facing brick, etc.

Limitations:
Not recommended for PVC supports.
Not recommended for waterproofing pools in contact with chemically treated water.
On non-porous substrates such as ceramic or marble tiles, Futur Primer-T PU is required.
Do not clean the support with bleach or highly corrosive products.