• Does not contain solvents.
• No toxicity once cured.
• Thixotropic properties. Suitable for vertical surfaces.
• Resistance to high temperatures.

Before applying the product, check that the support is clean and free of traces of oil, grease, silicone, contaminating waxes or soil materials. If repair is needed, apply appropriate repair mortars.
It is necessary to start from a porous concrete support, without grout and free of curing liquids. Minimum compressive strength of concrete: 15 N/mm2. Minimum tensile strength of concrete: 1 N/mm2.
If in doubt, carry out a test before application.
In most applications no primer is required. We recommend doing an adhesion test beforehand. If applied to very porous supports, a sealant must be used to prevent bubbles from forming.

Apply to one of the two surfaces and join the two elements. It may be necessary to use mechanical support until the adhesive develops its full strength.
Once the container is opened, we recommend its complete consumption.
Stable for 12 months from its manufacturing date, in its original, well-closed and undamaged container. Store in a dry and cool place at temperatures between +5ºC and +25ºC.
To clean materials and utensils, use FUTURSOLVENT-001 before the product hardens. Once the product has hardened it can only be removed by mechanical means.

• Very useful in all types of construction companies, quick repair contracts, general masonry, community maintenance, building repair and restoration, etc.
For application in the manufacture of wooden sandwich elements, rigid foam
(extruded polyurethane or expanded polystyrene), Aluminum, Iron, Cement or Plastic structures, etc.
For other supports we recommend carrying out tests to verify their adhesion.
Limitations:
• Before applying the product, check the conditions of the support and the environment (see table).
• In closed areas, ensure proper ventilation during application and 24 hours afterward.