• Consisting of a mixture of ultra-fast cements with special additives.
• Reaction time of 30 to 45 seconds. Application time for hardening less than 3 minutes.
• Can be applied under pressure.
• High-performance product that allows you to quickly solve breakdowns caused by pipe breaks.
• Product applications are economical, fast and durable.

The support must be firm, without impurities or dirt that could prevent adhesion.
(oils, greases, plaster, cement slurries, etc.), if necessary, remove all impurities with pressurized water or mechanical systems.
Before using the product, moisten the support to prevent the product from drying too quickly, avoiding leaving puddles of water.
In the treatment of fissures, these must be enlarged to perform the work comfortably.
It is used by mixing the product with water in a proportion of 3 to 3.5 parts for each part of water. We recommend not preparing mixtures no larger than 0.5 liters at a time.

Knead the material with your hands (we recommend using appropriate gloves) until you obtain a homogeneous paste with a plastic consistency (at the time of kneading it is normal to notice an increase in the temperature of the dough), at which point proceed to plug the passage. of water, pressing the area to be treated with your hand until the material hardens.
Treatment in several phases may be necessary. In important waterways it may be necessary to drain previously.
Do not apply at temperatures below 5ºC.
To clean utensils, use water once the application work is finished.

Very useful in quick repairs for breaks and water pipes.
Very useful in construction companies, building maintenance contracts and large communities, masonry and plumbing companies, hotels, residences, etc.