• Quick and easy application with 1:1 mixing ratios.
• Fast curing even at low temperatures.
• Suitable for application in closed spaces.
• Excellent adhesion on wet or green concrete.
• Solvent free. Non-flammable. Zero VOC. No special requirements for transportation.

Before applying the product, check that the support is clean and free of traces of oil, grease, silicone, contaminating waxes or soil materials. If repair is needed, apply appropriate repair mortars.
Apply at room temperature between +10 ºC and 40 ºC. The temperature of the support must be between +10 ºC and 40 ºC. The support must be dry and with relative humidity < 80% (it can be applied on damp supports).
It is important to control the dew point to prevent condensation from occurring and avoid whitish areas on the coating.
It is necessary to start from a porous concrete support, without grout, free of curing liquids, free of dust, level with porosity and dry. Minimum compressive strength of concrete: 15 N/mm2. Minimum tensile strength of concrete: 1 N/mm2.
If in doubt, carry out a test before application.
Mix the two components in the recommended proportion of 1 part by weight of component A for every 1 part of component B.
Shake well before use with a low-speed electric stirrer (300-400 rpm) to avoid including air in the product for 2-3 minutes until a homogeneous product is obtained.
Product ready to use. We do not recommend dilution.
Apply with a roller. On concrete or hot support we recommend moistening the support before application.
Apply in thin layers with a maximum final consumption of 150 g/m2 in one or two layers.
Once the container is opened, we recommend total consumption.
Carry out repainting before the previous layer dries to increase its adhesion (2 hours, maximum 24 hours).

Touch dry 1-2 hours
Pedestrian traffic 24 hours
Light traffic 2 days
Total curing 7 days
Data at ambient temperature of +25 ºC and 55% relative humidity.

Drying times can be affected by changes in environmental conditions and especially by changes in humidity and temperature.
Maintenance and cleaning: To maintain the appearance of the floor after application, all spills must be removed immediately after they have occurred. The floor must be cleaned regularly using rotating brushes, high-pressure cleaners, vacuum cleaners, using neutral detergents and appropriate waxes.
Once the container is opened, we recommend its complete consumption. Once the two components have been mixed, the mixture obtained must be applied, respecting the pot-life.
Stable for 12 months from its manufacturing date, in its original, well-closed and undamaged container. Store in a dry and cool place at temperatures between +5ºC and +25ºC.
Application in closed areas must be carried out ensuring proper ventilation during application and 24 hours after.
Do not exceed the maximum consumption because it may affect its adhesion and durability.
Avoid the formation of puddles of the product.
In applications exposed to U.V. rays. yellowing may occur.
For applications with chemical resistance, consult the technical department.
Incorrect treatment of cracks and singular points can lead to a reduction in the useful life of the pavement.
To clean materials and utensils, use FUTURSOLVENT 001 before the product hardens. Once the product has hardened it can only be removed by mechanical means.

• Very useful in all types of construction companies, quick repair contracts, general masonry, community maintenance, repair and restoration of buildings, industrial flooring, etc.
Application as:
• Primer suitable for polyurethane, polyurea, water-based coatings, acrylic and epoxy systems.
• Fast curing requirements.
Supported media:
• Dry or wet concrete.
• Mortar, non-glazed ceramic, metal sheets.
• For other supports we recommend carrying out tests to verify their adhesion.